Login or Register to make a submission.

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
  • Where available, URLs for the references have been provided.
  • The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.

General Requirements

  1. The authors must ensure that the submitted articles is authentic and never published in other journals, which is stated by a statement such as the attached letter.

  2. The articles that will be publicated in Journal of Fibers and Polymer Composites (JFPC) can be research results, policies analysis, brief communications, opinions, concepts, and reviews.

  3. The articles can be written in English using a format that complies with the language rules. The editor does not accept articles which are not meet the requested requirements.

  4. The published articles determined by JFPC Editors Board based on competent Peer-Reviewers judgment.

  5. The articles sent to editors via website. The articles must be written in Microsoft Word, figures/graphs in Microsoft Excel and write the authors name as the file nameAny difficulties may communicate with Journal of Fibers and Polymer Composites (JFPC) secretariat: Green Engineering Society.  Jl. Raya Negara Km.7 Tanjung Pati 26271 Kec. Harau Kab 50 Kota West Sumatera, 

  6. The authors may propose names of competent Peer-Reviewers in their field who hold a doctoral degree and with their full addresses; whose willing to review the articles.

Writing Standards

  1. The articles should be typed in 1.5 space except for Title, Abstract, Figures Title, and Tables Title typed with 1 space. The articles typed in one column of A4 paper with the total of 4000-7000 words including figures and tables.

  2. The articles should be typed using Microsoft Word software, Figures using JPEG or TGIF format, if there are graphs, attached the master files/Microsoft Excel. The standard font is Times New Roman 12.

  3. The articles should be arranged in sequence: title, authors name, authors institution’ full addresses, abstract, introduction, materials and methods, results and discussion, conclusions, acknowledgments (optional), and references. Institutional address (street, number, city, zip code) and authors email need to be written clearly.

  4. Binomial or trinomial (italic) latin nomenclature is used for plants, animals, insects, and diseases. The full chemical name is used for the compounds at the first mention.

  5. Measurement unit used is International Standard (IS).

  6. The writing of decimal numbers using point (.).

Articles Writing Procedure

Title. The title should be short, specific, and informative which reflects precisely the content of the articles, maximum in 15 words written in English. The title followed by authors name, institutions and addresses, and footnote referring to the corresponding author(s), complete with a mailing address, phone number, facsimile, and email.

Abstract. Abstracts are written in English consists of 200-250 words in one paragraph. Abstract contains the brief summary of the entire articles, i.e background, goals, methods, important results, discussion, and conclusions. Avoid using abbreviations unless it has been commonly used.

Keywords. Keywords are written in English, consists of  3-5 words/phrases and arranged by importance and presented at the end of abstract.

Introduction. In this section, presented a background that is supported by the brief literature, goals, and scopes of research if needed, so the readers can evaluate the results without having to read the previous publications. The literature used must be truly relevant to the research. The literature review should be integrated into the introduction, methodology, and discussion.

Methods. This section contains technical and detailed information, so the experiment can be repeated as well by other researchers. If special equipments/instruments are used, it necessary to provide the specifications and operating conditions.

Results and Discussion. This section presents research results, either in text, tables, or figures. The use if photos is limited on clear results. Each of figures and tables are numbered sequentially and must be referred in the articles.

Conclusions are written briefly but illustrates the research results substances.

Acknowledgments. This section can be used to appreciate funders, institutions, and personals who assisted during research and articles preparation.

References expect a minimum of 20 references primarily and latest (the last 10  years) with a minimum of 60% from reputation journal papers (Scopus or WoS). JFPC prefers articles which refer mainly to journal articles, research reports, and conference proceedings, rather than rely heavily on textbooks or handbooks to demonstrate articles' novelty in the subject discussed. The use of Mendeley as a tool in referencing is preferable and encouraged. References should be carefully checked for completeness, accuracy, and consistency.

Author(s) should cite publications in the text following the IEEE citation style. At the end of the paper, a reference list in alphabetical order should be supplied as follows:

[Ref number] Author’s initials. Author’s Surname, Book Title, edition (if not first). Place of publication: Publisher, Year.
[1] I.A. Glover and P.M. Grant, Digital Communications, 3rd ed. Harlow: Prentice Hall, 2009.

Book chapter
[Ref number] Author’s initials. Author’s Surname, “Title of chapter in book,” in Book Title, edition (if not first), Editor’s initials. Editor’s Surname, Ed. Place of publication: Publisher, Year, page numbers.
[2] C. W. Li and G. J. Wang, "MEMS manufacturing techniques for tissue scaffolding devices," in Mems for Biomedical Applications, S. Bhansali and A. Vasudev, Eds. Cambridge: Woodhead, 2012, pp. 192-217.

Electronic Book
[Ref number] Author’s initials. Author’s Surname. (Year, Month Day). Book Title (edition) [Type of medium]. Available: URL
[3] W. Zeng, H. Yu, C. Lin. (2013, Dec 19). Multimedia Security Technologies for Digital Rights Management [Online]. Available: http://goo.gl/xQ6doi
Note: If the e-book is a direct equivalent of a print book e.g. in PDF format, you can reference it as a normal print book.

article PDF versions of journal articles are direct copies of the print edition, so you can cite them as print journals.
[Ref number] Author’s initials. Author’s Surname. (Year, Month). “Title of article.” Journal Title [type of medium]. volume number, issue number, page numbers if given. Available: URL
[4] M. Semilof. (1996, July). “Driving commerce to the web-corporate intranets and the internet: lines blur”. Communication Week [Online]. vol. 6, issue 19. Available: http://www.techweb.com/se/directlinkcgi?CWK19960715S0005

Conference papers
[Ref number] Author’s initials. Author’s Surname, “Title of paper,” in Name of Conference, Location, Year, pp. xxx.
[5] S. Adachi, T. Horio, T. Suzuki. "Intense vacuum-ultraviolet single-order harmonic pulse by a deep-ultraviolet driving laser," in Conf. Lasers and Electro-Optics, San Jose, CA, 2012, pp.2118-2120.
Standard abbreviations may be applied to the title of the conference. For a table of abbreviations go to: http://www.ieee.org/documents/ieeecitationref.pdf

[Ref number] Author’s initials. Author’s Surname, “Title of thesis,” Designation type, Abbrev. Dept., Abbrev. Univ., City of Univ., State, Year.
[6] J. O. Williams, “Narrow-band analyser,” Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.

Note: Include as much of the key information as you can find for a given website. If a web page has no personal author, you can use a corporate author. Failing that, you can use either Anon. (for anonymous) or it is permissible to use the title of the site.
[Ref number] Author’s initials. Authors Surname. (Year, Month. Day). Title of web page [Online]. Available: URL
[7] BBC News. (2013, Nov. 11). Microwave signals turned into electrical power [Online]. Available: http://www.bbc.co.uk/news/technology-24897584 [14] M. Holland. (2002). Guide to citing internet sources [Online]. Available: http://www.bournemouth.ac.uk/library/using/guide_to_citing_internet_sourc.html

Authors who publish with JFPC agree to the following terms:Authors retain copyright and grant the Journal of Fibers and Polymer Composites right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Journal of Fibers and Polymer Composites. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Journal of Fibers and Polymer Composites. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).